Machines for static and low cycle fatigue (LCF) testing

 MAS2 S small

The main areas of application are the medical industry, in particular implantology and prosthetics, and material analysis and control.


Since the end of 2017, we have been working on an innovative project together with the Industrial Engineering Faculty of the University of Bologna. After extensive market research, we apprehended that there was still no equipment on the market that could be used to test medical implants and orthopaedic prostheses. For this reason, we decided to design and manufacture a sophisticated machine that could meet this need: MAS 2-S, MIB Multiaxial Simulator.

MAS 2-S is meant to test

- spinal systems, including cages and spinal implants,

- hip and knee prostheses,

- osteosynthesis systems.


An innovative and sophisticated testing system

MAS 2-S, MIB Multiaxial Simulator, is specifically tailored to test medical implants and orthopaedic prostheses, unlike all other existing machines, which are multifunctional and not suitable for the aforementioned tests due to their redundant architecture, composed of more than three axes.  MAS 2-S has 2 axes, which test axial load and torsion. Moreover, by 2020, we are launching on the market a more sophisticated simulator with three axes, which will be able to test bending too.

The best quality at the best price

This top-quality simulator is cheaper than any other testing system on the market.

Electric actuation and its several advantages

MAS 2-S has electric actuators instead of hydraulic actuators. Electric actuators offer significant advantages.
Firstly, they allow to perform more accurate measurements and require less mechanical maintenance.
Secondly, thanks to the use of this technology, there is no fluid leakage. Thus, the production department is cleaner.
Thirdly, unlike any other existing simulator, this machine does not need any refrigeration system. As a result, it is smaller and easier to install.

A wide angle of view

Lastly, the angle of view of  MAS 2-S is far wider than that of any other existing machine. More precisely, it is 180 °. This allows to view the sample from any side.